Troubleshooting guide
Windows Marks the Printer Offline: Diagnose the Queue State First
Category: Printing
You are on a Windows 11 PC with a wireless printer that is powered on, yet the print queue still labels it offline before you have run a proper diagnosis.
Confirm the queue is the only fault
Open Settings > Bluetooth & devices > Printers & scanners, select your printer, and choose Open print queue. If the queue window shows the printer as offline while the printer’s control panel is awake and connected to the same Wi-Fi network, the fault is in the Windows queue state, not the hardware. Check the printer’s own network report or display for an IP address; if it has one, the printer is reachable and you can proceed.
Clear the stale offline flag
In the print queue window, click Printer and uncheck Use Printer Offline if it is checked. Then cancel every pending job, because one stuck job can keep the queue in an offline state. Restart the Print Spooler service: press Windows+R, type services.msc, locate Print Spooler, and choose Restart. Reopen the queue and confirm the status line no longer reads offline.
Verify with a test page
Print a test page from Printer > Properties > Print Test Page. A successful page means the queue state is restored. If the queue returns to offline, note whether the printer’s IP address changed; a changed address is the usual cause of this recurring all printers offline windows 10 symptom and points to a port or reservation issue rather than a driver fault.
Rollback note
If you changed the port or driver during diagnosis, use Printer > Properties > Ports to reselect the original port, or Device Manager > Print queues > Update driver > Roll Back. This returns the setup to its prior state before you try another path.
If the offline flag persists after these checks,

Ask for help with your queue status and printer IP address.