Troubleshooting guide

HP Printer Connected to Wi-Fi but Offline on Windows 10: Fix the Offline Status

Category: Printing

Your HP printer is powered on and connected to Wi-Fi, but Windows 10 still marks it offline in the queue. This guide fixes that specific mismatch.

Check the Printer’s Actual Network Status

On the printer’s control panel, print a network configuration page. Verify the IP address is present and the status says Connected or Ready. If the IP is missing or shows 0.0.0.0, the printer lost its Wi-Fi link—reconnect it before continuing. If the IP is valid, note it and move to the next check.

Verify the Windows Port Matches the Printer’s IP

Open Settings > Devices > Printers & scanners. Select your HP printer, click Manage, then Printer properties > Ports. Look for a Standard TCP/IP port with the same IP you noted. If the port uses a different IP (common after a router restart), click Add Port > Standard TCP/IP Port, enter the correct IP, and assign it. This alone often resolves the hp printer connected to wifi but offline windows 10 status.

Clear the Stuck Queue

Open Services (services.msc), stop Print Spooler. Navigate to C:\Windows\System32\spool\PRINTERS and delete all files. Start Print Spooler again. This removes any job holding the offline flag.

Verification Test

Print a Windows test page from Printer properties > General > Print Test Page. The queue should show the job as Printing, then disappear. If the status still reads Offline, restart the printer and PC once, then repeat the port check.

Rollback Note

If you changed the port and printing fails, return to Ports and reselect the original port. Your previous configuration remains listed.

Still stuck?

Windows printer queue and port settings beside a printed test page

Ask for help and we’ll diagnose the remaining cause.


Back to the service page · Ask about this exact symptom