Troubleshooting guide
HP Smart Printer Offline on Windows 11: Fix the Offline Status Before You Reset
Category: Printing
Your Windows 11 PC shows your HP Smart printer as offline in the queue, even though the printer is powered on and connected to Wi-Fi. This is the point where a controlled diagnosis should begin, not a full reset. Here is how to isolate the cause and restore the expected status.
Check the Printer’s Network State First
On the printer’s control panel, open the wireless or network settings and print a network configuration report. Look for the IP address and connection status. If the report shows no IP address or a disconnected state, the printer has dropped off the network. Reconnect it to the same 2.4 GHz or 5 GHz band your PC uses, then wait for a valid IP address to appear.
Confirm Windows Sees the Same Device
On your PC, open Settings > Bluetooth & devices > Printers & scanners. Select your HP Smart printer and open Print queue. If the queue still says offline, click Open printer queue, then Printer > Use Printer Offline to clear the checkmark. Next, go to Printer > Properties > Ports and confirm the selected port matches the printer’s current IP address. If it points to a stale WSD or old IP entry, change it to the correct Standard TCP/IP port.
Verify the Fix
Print a one-page test document from Notepad. Watch the queue: the status should change from offline to printing, and the job should complete. If the job remains stuck, cancel it, power-cycle the printer, and repeat the port check once.
Rollback Note
If a port change makes things worse, return to the previous port selection in Printer > Properties > Ports before trying another method. For persistent cases,

Ask for help rather than reinstalling drivers blindly.
A quick check of the printer’s IP and the Windows port usually resolves an hp smart printer offline windows 11 status without a full reset.