Troubleshooting guide
Printer Goes Offline After Printing: Fix Windows 11 Offline Status
Category: Printing
You print a document successfully, but moments later Windows 11 shows your wireless printer as offline even though it is powered on. This guide walks you through a controlled diagnosis to restore the expected online status.
Check the Printer’s Actual Network State
First, confirm the printer is still connected to your Wi-Fi. On the printer’s control panel, print a network configuration page. Look for the IP address and signal strength. If the IP is missing or shows 0.0.0.0, the printer dropped off the network. Reconnect it to the same 2.4 GHz or 5 GHz band your PC uses. If the IP is present, note it and proceed.
Verify the Windows Queue and Port
Open Settings > Bluetooth & devices > Printers & scanners. Select your printer and click Open print queue. If the queue shows the printer offline, click Printer in the menu bar and uncheck Use Printer Offline if it is checked. Then go to Printer > Properties > Ports. Confirm the checked port matches the printer’s current IP address. If it points to a WSD port or an old IP, change it to a Standard TCP/IP port with the correct address. This often resolves the printer goes offline after printing issue because Windows loses the dynamic address after the job completes.
Restart the Print Spooler
Press Windows + R, type services.msc, and press Enter. Find Print Spooler, right-click, and choose Restart. Wait 30 seconds. This clears any stuck job that may have left the queue in an offline state.
Verification Test
Print a one-page test document from Notepad. Watch the queue status: it should change from Offline to Ready within 10 seconds and the page should print. If it prints and stays online for five minutes, the fix is confirmed.
Rollback Note
If changing the port causes new errors, return to Ports and recheck the original WSD port. Then restart the spooler again. If the offline status returns,

Ask for help for a deeper port and driver review.