Troubleshooting guide

Wireless Printer Not Found on Windows 11: Check the Network Path First

Category: Printing

Troubleshooting

You are on a Windows 11 PC, your wireless printer is powered on and joined to the same network, yet Windows cannot discover it. Before you reset anything, confirm the PC and printer are actually on the same network path. Open Settings > Network & internet > Wi-Fi and note the exact network name. On the printer, print a network configuration page and compare the SSID and IP address. If the SSIDs differ, the printer is on a guest or neighbor network; reconnect it to the PC’s network and retry. If the SSIDs match, check the IP address: open Command Prompt and run ping followed by the printer’s IP. A reply means the device is reachable and the problem is discovery, not connectivity. A timeout means the printer dropped off the network; power-cycle it and confirm its Wi-Fi light is solid. Next, verify network discovery is enabled: Settings > Network & internet > Advanced network settings > Advanced sharing settings, and turn on network discovery and file and printer sharing for private networks. Then open Settings > Bluetooth & devices > Printers & scanners and select Add device. If the printer still does not appear, choose Add manually and select Add a printer using an IP address, entering the address from the configuration page. This bypasses discovery and confirms whether the driver and port work. To verify, print a Windows test page from Printer properties. If it prints, discovery was the only failure. If you changed sharing settings, note the original values so you can restore them if other network devices lose access. For a guided diagnosis of this wireless printer not found condition,

Windows printer queue and port settings beside a printed test page

Ask for help.


Back to the service page · Ask about this exact symptom