Troubleshooting guide

WSD Port Printer Offline on Windows 11: Diagnose the Port Before Resetting

Category: Printing

Your Windows 11 PC shows the printer offline in the queue, but the printer is powered on and connected to Wi-Fi. Before you reset anything, let’s check whether the WSD port itself is the problem.

Check the Port and Printer State

Open Settings > Bluetooth & devices > Printers & scanners. Select your printer, then click Printer properties > Ports. Look for a WSD port (it usually starts with “WSD-” followed by a long identifier). If the checked port is not WSD, stop here—this fix doesn’t apply. If it is WSD, note the port name. Next, open the printer’s web interface or front panel and confirm its IP address. A WSD port relies on network discovery, so a changed IP or disabled discovery can cause the wsd port printer offline status even when the printer is awake.

Test WSD Discovery

In Windows, open Services (services.msc) and ensure Function Discovery Provider Host and Function Discovery Resource Publication are running. Then return to Printer properties > Ports and click Add Port > WSD Port > Next. Windows will scan for WSD devices. If your printer appears, select it and click OK. If it does not appear, WSD discovery is failing—check that network discovery is enabled in Control Panel > Network and Sharing Center > Advanced sharing settings.

Verification Test

Print a test page from Printer properties > General > Print Test Page. If it prints, the WSD port is working. If the queue still shows offline, remove the WSD port and add it again using the steps above.

Rollback Note

If the new WSD port doesn’t restore printing, switch back to the original port in Printer properties > Ports, then consider a standard TCP/IP port using the printer’s IP address. For guided help,

Windows printer queue and port settings beside a printed test page

Ask for help.


Back to the service page · Ask about this exact symptom