Troubleshooting guide

WSD Printer Offline in Windows 11: Diagnose the Port Before You Reset Anything

Category: Printing

Your Windows 11 PC lists a wireless printer as offline even though the printer is powered on and sitting on the same network. When the queue shows that status, the practical first move is to confirm which port the queue is using, because a stale WSD entry can keep reporting offline after the device itself is fine.

Check the port and driver state

Open Settings > Bluetooth & devices > Printers & scanners, select the printer, and choose Printer properties. On the Ports tab, note whether the checked port is a WSD entry. If it is, the queue is relying on a discovery record rather than a fixed address. Next, open the queue and clear any stuck jobs, because a failed job can hold the status in place.

Rebuild the connection

In Printer properties, click Change Properties, then the Ports tab, and add a TCP/IP port using the printer’s current IP address from its network configuration page. Apply it, then print a Windows test page. If the test page prints, the WSD record was the problem; if it fails, the address or driver needs attention. This is the controlled diagnosis that separates a stale wsd printer offline record from a real network fault.

Verification test

Print one page from Notepad and confirm the queue status changes from offline to ready. Then power the printer off and on once and print again to confirm the setting survives a reconnect.

Rollback note

If the TCP/IP port does not print, return to Printer properties > Ports and reselect the original WSD port so the queue matches its previous state, then

Windows printer queue and port settings beside a printed test page

Ask for help before removing the device.


Back to the service page · Ask about this exact symptom